Using The Phone; Switch Handset On Or Off; Make An External Call; Preparatory Dialling - BT HUDSON 1500 User Manual

Using the phone

Switch handset on or off

To switch off:
1. Press and hold
5 seconds.
To switch on:
1. Press and hold

Make an external call

1. Press .
2. When you hear the dial tone, dial the number.

Preparatory dialling

1. Dial the number first. If you make a mistake press
delete the last digit.
2. Press to dial.

End a call

1. Press .

Options during a call

1. During a call, press
2. Scroll and
StArt 2nD CAll:

Open the Phonebook during a call

1. During a call, you can check entries in the Phonebook.
Press then select phoneBook.
optionS
2. Scroll or to the entry you want.
3. Press to see the number.
SeleCt
4. Press to return to the previous menu level.
BACk
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
until the handset switches off, after about
until the handset switches on.
to open the in-call menu.
optionS
between the two options
When you make a call, the In use light
on the base flashes.
Call timer
Your handset will automatically time
the duration of all external calls.
The handset display shows the call
duration both during and for a few
seconds after your call.
Out of range warning
When the handset goes out of range
of the base,
a call, the line will hang up. Move
back within range. The handset will
automatically re-connect to the base.
Press and hold CleAr to delete the
whole number and return to standby.
to
CleAr
Press SAve to add the number to the
Phonebook, see page 18.
or
phoneBook
14
flashes. If you are on