Setting Up For Multiple Packs; Set Date And Time Manually - BT Granite User Manual

Setting up for multiple packs

If you have purchased a BT Granite multiple pack, you will need to prepare any
additional handsets and chargers for use.
For each additional handset and charger:
1. Insert the power adaptor with the red connector (item code 045982) into the
underside of the charger. Plug the other end into the mains wall power socket
and switch on.
2. Insert the battery in the handset as shown on the previous page and put the
battery compartment cover into place.
3. Attach the desk mounting plinth (optional) in the same way as shown on
previous page.
4. Charge the handset for at least 24 hours. When the handset is fully charged
the icon will be displayed.
Any additional handsets supplied as part of a multipack are pre-registered to
the base so, once charged, are ready for use. The handset number is shown in
the display.

Set date and time manually

1. Press Menu, scroll to
2. is highlighted. Press SeleCt. The current date and time
Set DAte/tiMe
setting is displayed.
3. Use the keypad to enter the correct time and date. Press
4. Press until you return to standby.
Your BT Granite is ready for use.
If you experience any problems, please call the Helpline on 0808 100 6556*
and press SeleCt.
CloCk & AlArM
to confirm.
ok
Getting started
Automatic date and time setting
Providing you have subscribed to your network's
Caller Display service, the date and time is set
automatically for all handsets when you receive
your first call.
The date and time is recorded with each
answering machine message you receive.
If you do not have a Caller Display service you can
set the date and time manually.
Change Time & Date format
You can set the time format to the 12 or 24 hour
clock. You can also change the date format to
present the day or the month first, see page 27.
9