Table of Contents
Advertisement
2. Insert the Li-ion rechargeable battery supplied into the handset.
Then slide the compartment cover into place.
3. Place the handset on the charger to charge for at least 24 hours.
Any additional handsets supplied as part of a multipack are
pre-registered to the base so, once charged, are ready for use.
The handset number is shown in the display.
Set date and time manually
1. Press
and scroll
Menu
2. Scroll
to
Set Time
3. Enter the time using the 12 hour clock and press
4. Press
and scroll
Back
5. Enter the date, e.g. 22/09/2007 and press
Then press
to return to standby.
Back
If you wish to set the day now as well, please refer to page 34.
Your BT Domus is ready for use.
If you experience any problems, please call the Helpline on 0870 605 8047* or email bt.helpdesk@suncorptech.com
to
then press
Clock & Alarm
and press
.
OK
to
. Press
Set Date
OK
OK
When charging the battery from flat,
it will take about one minute for the
handset display to power up.
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, giving the handset less
talk/standby time. Eventually they will
need to be replaced. New batteries are
available from the BT Domus Helpline
on 0870 605 8047*.
For instructions on how to install a
new battery, see page 8.
.
Date and time
Select
Providing you have subscribed to your
network's Caller Display service, the
date and time is set automatically for
to save.
all handsets when you receive your
OK
first call. If you do not have a Caller
.
Display service you can set the date
and time manually.
to save.
The date and time is recorded with
each answering machine message
you receive.
To change bewteen the 12 and 24
hour time format, see page 33.
Getting started
9
Advertisement
Table of Contents
