Receiving A Call; Earpiece/Handsfree Volume; Mute (Secrecy); Handsfree - BT HUDSON 1500 User Manual

Receiving a call

When the phone rings the display shows the caller's number
if available or the caller's name if it matches an entry in the
phonebook. If you do not have a Caller Display service, the screen
shows
externAl CAll.
1. Press to answer the call.
Or lift the handset off the base or charger.

Earpiece/Handsfree volume

During a call you can adjust the volume of the earpiece or handset
loudspeaker. There are 5 levels.
1. Press or to increase or decrease the volume.

Mute (Secrecy)

During a call, you can talk to someone nearby without your
caller hearing.
1. Press Mute. Your caller cannot hear you.
on the handset screen.
2. Press to return to your caller.
unMute

Handsfree

Handsfree lets you talk to your caller without holding the
handset. It also enables other people in the room to listen to your
conversation over the loudspeaker.

Make a handsfree call

1. Dial the number then press
over the handset loudspeaker. Press
call between the loudspeaker and the earpiece.

Answer a call handsfree

1. Press twice. The call is transferred to the handset
loudspeaker.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
is shown
Mute on
twice. You hear your call
again to switch the
Auto answer
As long as you have auto answer
set to ON you can answer a call by
lifting the handset off the base.
If you have switched auto answer off,
you will need to press as well.
Auto answer ON is the default setting.
See page 25.
During a handsfree call, press
to change the volume.
Auto answer is set to ON as the
default, see page 25. If you lift the
handset to answer and then press the
button the loudspeaker will be
activated.
15
or