Getting Started; Location; Setting Up - BT FREELANCE 102 User Manual

Digital cordless telephone
Table of Contents

Advertisement

Getting started

6
WARNING
Do not place your BT Freelance
102 in the bathroom or other
humid areas.
Handset range
The BT Freelance 102 has a range
of 300 metres outdoors when there
is a clear line of sight between the
base and the handset. Any
obstruction between the base and
handset will reduce the range
significantly. With the base indoors
and handset either indoors or
outdoors, the range will normally
be up to 50 metres. Thick stone
walls can severely affect the range.
Signal strength
The
symbol on your handset
display indicates when you are in
range. When the
the range is poor, if it is not
displayed you are out of range.
You should move closer to the base
if this happens to ensure the full
functionality of your phone.
IMPORTANT
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base station must be plugged
into the mains power at all times.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com

Location

You need to place your BT Freelance 102 base within 2
metres of a mains power and telephone socket so that
the cables will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference.
Your BT Freelance 102 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it as
high as possible ensures the best signal.

Setting up

symbol flashes
1. Plug the mains power cable into the power socket on the
back of the base. Plug the other end into the mains
socket and switch on.
Power adaptor cable

Advertisement

Table of Contents
loading

Table of Contents