Table of Contents
Advertisement
General information
30
IMPORTANT
The BT Freelance 102 digital cordless telephone is
not designed for making emergency telephone calls
when the power fails.
This product is intended for connection to analogue
public switched telephone networks and private
switchboards in the United Kingdom.
Safety information
•
Only use the power supply supplied with your BT
Freelance 102. Using an unauthorised power
supply will invalidate your guarantee and may
damage the telephone.
•
Only use the telephone line cord supplied with
your BT Freelance 102, otherwise your telephone
may not work correctly.
•
For the handset, use only AAA Nickel Metal
Hydride (NiMH) rechargeable batteries with
a minimum capacity of 600mAh. Never use other
batteries or conventional alkaline batteries as this
could lead to a short circuit or destroy the battery
casing.
•
If the keylock is switched on, it is NOT possible to
make calls, including emergency numbers
(999/112).
•
Do not open the handset (except to replace the
handset batteries). This could expose you to high
voltages or other risks.
•
Radio signals transmitted between the handset
and base may cause interference to hearing aids.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
•
It is recommended that advice from a qualified
expert be sought before using this product in the
vicinity of emergency/intensive care medical
equipment.
•
It is recommended that if you have a pacemaker
fitted you check with a medical expert before
using this product.
•
Never dispose of batteries in a fire. There is a
serious risk of explosion and/or the release
of highly toxic chemicals.
Cleaning
•
Simply clean the handset and base with a damp
(not wet) cloth, or an anti-static wipe. Never use
household polish as this will damage the product.
Never use a dry cloth as this may cause a static
shock.
Environmental
•
Do not expose to direct sunlight.
•
The BT Freelance 102 handset may become
warm when the batteries are being recharged.
This is normal. We recommend that you do not
place the product on antique/veneered wood to
avoid damage.
•
Do not stand your product on carpets or other
surfaces which generate fibres or place it in
locations preventing the free flow of air over its
surfaces.
•
Do not submerge any part of your product in
water and do not use it in damp or humid
conditions, such as bathrooms.
Advertisement
Table of Contents
