Getting Started; Location; Setting Up - BT Freelance XD7500 User Manual

Hide thumbs Also See for Freelance XD7500:
Table of Contents

Advertisement

Getting started

6
WARNING
Do not place your BT Freelance
XD7500 in the bathroom or other
humid areas.
Handset range
The BT Freelance XD7500 has a range
of 300 metres outdoors when there is
a clear line of sight between the base
and the handset. Any obstruction
between the base and handset will
reduce the range significantly. With
the base indoors and handset either
indoors or outdoors, the range will
normally be up to 50 metres. Thick
stone walls can severely affect the
range.
Signal strength
The
symbol on your handset screen
indicates when you are in range. When
you are out of range, the
flashes, and the screen displays
SEARCHING. You should move closer to
the base if this happens to ensure the
full functionality of your phone.
IMPORTANT
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base station must be plugged into
the mains power at all times.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp

Location

You need to place your BT Freelance XD7500 base within 2
metres of a mains power and telephone socket so that the
cables will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT Freelance XD7500 works by sending radio signals
between the handset and base. The strength of the signal
depends on where you site the base. Putting it as high as
possible ensures the best signal.

Setting up

1. Plug the mains power cable into the power socket on the back
of the base and secure the cable behind the retaining clip.
symbol
Plug the other end into the mains socket and switch on.
Mains power cable

Advertisement

Table of Contents
loading

Table of Contents