12
Using your BT Diverse Repeater
If you experience any problems, please call the Helpline on Freephone 0808 100 7337*
1. Switch the power to the Repeater ON for between 1 to 5
seconds then switch it OFF.
2. Switch the power ON again. If the left-hand green LED on
the Repeater flashes slowly switch it off again.
Switch it on again. The confidence tone is now activated.
To reset the Repeater
Before re-installing the Repeater, it needs to be reset. Before
starting, make sure the Repeater's power adaptor is
connected to the Repeater and the mains socket, but
switched off at the mains.
1. At the Repeater, switch the power on for 1 to 5 seconds and
switch it off again.
2. Switch on for 25 to 35 seconds and switch it off again. The
Repeater should now be reset.