Table of Contents
Advertisement
Switch off the mains power at the wall socket
This is for the registration procedure. Before beginning
registration, all unregistered Repeaters should be
switched off.
Register the Repeater to the base station
1. Turn on the Repeater mode in the product that you will be
registering the Repeater to. This varies dependant on the
product, the instruction can be found in the relevant
userguide, provided with the product.
2. Put the product into registration mode, this is normally done
by pressing and holding the
button, as appropriate.
Registration
3. Switch on the power to the Repeater at the wall socket.
The green lefthand LED on the Repeater will flash, then
after a short while the LED will remain on, indicating that
the registration is complete.
If you experience any problems, please call the Helpline on Freephone 0808 100 7337*
button, or by pressing the
Find
Getting started
9
Advertisement
Table of Contents
