Advertisement
Link button
What do you want to do?
Prepare to join a new network
Join a new network
Reset to factory settings
TIP: you may find it helpful to use a watch or a clock when using the Link button.
Reset to factory settings
If your extender stops working or becomes unpaired, you can reset it to the
factory settings:
Make sure the extender is plugged in and the power socket's switched on.
1
2
Press the Link button for more than 15 seconds until the Data and Power lights
go out. If everything's okay, the Power indicator on the extender will light up.
È
For detailed instructions and technical information for setting up the extenders, please
see the Frequently Asked Questions at bt.com/producthelp
Press and hold button
5 to 8 seconds
1 second
More than 15 seconds until Data and Power lights go out
È
Advertisement
