To Turn The Repeater's Confidence Tone On And Off - BT DIVERSE REPEATER User Manual

You should hear a dial tone and confidence tones, if they
have been switched on (see below). Look at the Repeater, the
green right-hand LED should be flashing.
Your Repeater is now ready for use. A Repeater can support
up to two handsets simultaneously to make or receive calls. If
you try to use a third handset to make
an internal/external call via the Repeater whilst two handsets
are using it, the call will fail.
However, it may still be possible for a third handset to make a
call if it is near the main base station. (The number of
simultaneous internal/external calls will vary according to the
type of base station you use, please refer to the base station
user guide.)

To turn the Repeater's confidence tone on and off

The Repeater has the option to provide a confidence tone (a
confirmation beep every 2 seconds) which sounds when your
handset is working in the Repeater area.
It is suggested that the confidence tone is switched ON to aid
installation and to get an idea of the base and Repeater
reception areas.
Before starting this procedure the Repeater's power adaptor
must be connected to the Repeater and the mains socket, but
switched OFF at the mains socket.
If you experience any problems, please call the Helpline on Freephone 0808 100 7337*
Using your BT Diverse Repeater
Turn the Repeater confidence tones
on/off as required (see below).
The default setting for the confidence
tone is OFF.
11