Table of Contents
Advertisement
The Repeater will not register
•
Reset the Repeater as described on page 12.
Cannot make or receive calls when in the Repeater
reception range
•
There is no power to the Repeater. Check that the Power
adaptor lead is plugged into the Repeater, the power adaptor
is plugged into the mains socket and the mains power is
switched on.
•
The Repeater is not registered. You will have to repeat the
registration process again with the base station concerned.
Call lost or audio becomes poor when moving from the base
reception area to the Repeater reception area
•
You may be moving out of range of the base/repeater areas, or
are in a 'blind spot'. Move towards the base or Repeater.
•
Some base stations and handset combinations do not support
call handover during conversation when moving from base to
Repeater area.
Handset beeps every 2 seconds when in the Repeater
reception area
•
The Repeater's confidence tone has been switched on.
To switch the confidence tone off, see page 11.
If you experience any problems, please call the Helpline on Freephone 0808 100 7337*
Help
15
Advertisement
Table of Contents
