Fast Transfer From Pic To Phone - BT CONVERSE 2015 User Manual

This lets you copy the entries from a
Converse 2015 into the PIC.
When you transfer the memory, any entries
currently stored in the PIC will be overwritten.
When the display shows PROGRAM MODE
(see page 14).
Press and release the
the display shows WRITE TO PIC.
Press the
shows SURE?
(Press the
cancel.)
Press the
the entries. The display shows
DOWNLOADING.
Replace the handset when prompted by
the display.
16
button until
button. The display
button if you want to
button to transfer
Once your PIC contains the entries you want,
it is easy to transfer them to any number of
Converse 2015s.
It takes just 5 seconds to transfer the memory.
If a blank PIC is used by mistake, it will not
affect any current numbers stored on the phone.
Remove the plastic cover from the
one-touch buttons.
Insert the pre-programmed PIC into
the PIC socket.
Lift the handset. The display shows
UPLOADING.
When the transfer is finished, display
shows REPLACE HANDSET AND REMOVE PIC.
Replace the handset. Remove the PIC
and replace the plastic cover. Your one
touch entries are stored in the M1-M8
buttons.