Using The One-Touch Memory - BT CONVERSE 2015 User Manual

This lets you store entries in the
one touch memory under the
buttons.
Press and hold the
still holding the button lift the handset.
The display will show PROGRAM MODE.
Release the button. The display will
show NO PIC.
Continue to press and release the
button until the display shows
PROG PHONE MEM.
Press the button. The display
shows PRESS M1 TO M8 TO CHANGE
MEM.
Press the button you want to
store the number under. The display
shows PHONE MEMORY: M1.
Press the
see the stored number and name.
If no entry is stored, the display shows
MEMORY IS EMPTY.
Press the button. The display
shows ENTER NEW NUMBER.
Enter the number you want.
If you make a mistake, press
delete digits.
If you need to insert a pause, press
where required.
button and whilst
or if you want to
to
Press the button to confirm.
The display shows M1 NUMBER STORED
then ENTER NEW NAME.
Enter the name you want using the
letters on the keypad.
For example to enter the name ANNE:
Press once to enter A.
Press three times to enter N
Press three times to enter N
Press three times to enter E.
Each time you press the button the
letter alternates between capital and
lower case.
Press to enter other characters e.g.
, , .
If you make a mistake press the
button to delete the last character.
Press or to move the
cursor to the place you want.
Press the button to confirm.
The display shows M1 NAME STORED.
Press the or
return to the Program Mode menu.
Replace the handset.
button to
11