At A Glance - BT CONVERSE 2015 User Manual

At a glance

PIC socket
Lets you insert the PIC to copy the
phone's settings or download new
settings.
Recall
Used to access some BT Select Services
and when using your phone with a
switchboard.
Redial
Press to redial the last number called.
Inductive coupler
Improves sound quality for people
with hearing aids.
1
One touch memory buttons (M1-M8)
Each button dials a stored name and
number with just one press.
M1 M5
M2 M6
M3 M7
M4 M8
Converse 2015
Redial R Pause
1
2 3
4 5
6
8
7 9
0
Keypad
2
In use phone light
Comes on when the phone line is in use.
Flashes when a caller is on hold.
In use data light
Comes on when the data line is being
used.
Calls/Messages light
Flashes to indicate an incoming call. Also
flashes when a new message is waiting to
be collected.
Pause
Lets you insert a dialling pause into a
stored number.
Hold
Lets you put a caller on hold.
Secrecy
Stops your caller from hearing you, so you
can talk privately to someone else in the
room.
Volume
Lets you increase or decrease the
loudspeaker or handset volume.
Handsfree and Handsfree indicator light
Lets you use the loudspeaker for making
and receiving calls. The handsfree
indicator light will come on when the
handsfree feature is in use.
Ringer volume
Switch between Hi, Med and Lo.
Ringer
Hi Med Lo
Line 1 & Line 2/Data sockets
Line 2 Line 1
Data
Line 1/Line 2 switch
Set to Line 1 if one telephone line is plugged in. (A
single line must be connected to the Line 1
socket)
Set to Line 2 if two telephone lines are plugged in.
Ring/MW1/MW2
Sets the calls/messages mode, see page 8.