Spin Speed Button - Electrolux EDC 5339 Instruction Booklet

125981580 gb.qxp 2005-09-21
If you open the door during a programme, in order to
restart the programme you must press the
Start/Pause button again after having closed the
door. The icon appears on the display above the
.
relative button

4 SPIN SPEED Button

Press this button repeatedly to change the value of
the spin speed.
This value appears on the display above the relative
button.
To do this you must know the real spin speed that
your laundry has been spunin the washing machine.
Depending on the type of laundry the spin speeds
are the follow:
- COTTONS:..........800-900-1000-1100-1200-1300
1400 1500-1600 rpm.
- SYNTHETICS: ....800-900-1000 rpm.
- BABY: ................800-900-1000-1100-1200 rpm.
If you do not know the exact laundry spin speed you
can choose blank (no value on the display). The
tumble dryer will dry the laundry using a default
factory drying cycle.
Using this option you could decrease the drying
cycle time, saving energy.
If you have selected a time controlled programme
(60 min. or 30 min.) you could not use this option
because it has been selected a fixed time of drying.
If you try to press this button a warning message
«Selection error» appears in the display.
5 OPTION, CHANGE and EXIT
Buttons
Option button allows you to move through the
option icons.
Change button allows you to select/change the
status of the different icons.
07:07 Page 8
Exit button allows you to return to the previous
selection.
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
pressing the START/PAUSE
By depressing the «Option» button, all the symbol
icons, allowed for the selected programme, will
appear in the display.
The first option (Half Power) will start flashing. Its
name and status will appear on the display.
If you want to change the option status, press
«Change» button. A line will appear below the
selected icon, indicating that the option is set.
To select the other options press again the «Option»
button and proceed as before.
Once you have completed the selection of the
options, press the «Exit» button, the selected icons
will remain fixed on the display.
Note: To modify the already chosen option
selections, repeat the previous procedure.
Important! While selecting the option, if you press
the «Spin» or Start/Pause
selector dial, the relative function will be executed.
Half Power
Selecting this option allows drying to be performed at
a lower temperature, for delicate items.
The corresponding icon appears on the display
during set up mode and the drying cycle.
A dash is shown under the relative icon to indicate
that the option has been selected.
This option can also be used for time controlled
8
button.
button, or you turn the