Emerson HIGH COUNTRY KF160OI00 Owner's Manual page 11

Emerson High Country 3/10/05
8. Connect the white wire from the light fit-
ter to the white wire from the motor
(Figure 16). Connect the black wire
from the light fitter to the black wire
from the motor. Make sure connectors
are fully engaged.
LIGHT FITTER
ADAPTER
WHITE
WIRE
ADAPTER
PLATE
Figure 16
9. Position the adapter/light fitter assem-
bly over the adapter plate and secure
using three 8-32 x 12mm pan head
screws (Figure 17).
8-32 x 12mm PAN HEAD
SCREW (3)
Figure 17
9:32 AM Page 11
10. Screw in two 60-watt medium base
bulbs into the light fitter sockets
(Figure 18). Place the lower glass and
then the decorative cap over the
threaded nipple. Install the finial nut
and securely tighten.
BLACK
WIRE SOCKET
LOWER GLASS
Figure 18
11. Your ceiling fan is now installed and
wired to be controlled by your remote
control system.
ADAPTER/
LIGHT FITTER
ASSEMBLY
11
60-WATT MEDIUM BASE
BULB (2)
LIGHT FITTER
THREADED
NIPPLE
DECORATIVE
CAP
FINIAL NUT