Your Ceiling Fan How To Hang - Emerson LARISSA KF220TZG00 Owner's Manual

BP7307 Larissa KF220 1/9/06
How to Hang
Your Ceiling Fan
WARNING
!
The fan must be hung with at least 7'
of clearance from floor to blades
(Figure 11).
CEILING
AT
LEAST
7'
FLOOR
Figure 11
WARNING
!
The outlet box and joist must be
securely mounted and capable of
supporting at least 50 lbs. Use only a
U.L. outlet box listed as "Acceptable
for Fan Support".
WARNING
!
To reduce the risk of fire, electric
shock, or personal injury, mount fan
to outlet box marked "Acceptable for
Fan Support", and use screws
supplied with outlet box. Most outlet
boxes commonly used for support of
light fixtures are not acceptable for
fan support and may need to be
replaced. Consult
electrician if in doubt.
1. Securely attach the hanger bracket to
the outlet box using the two screws
supplied with the outlet box (Figure 12).
8:36 AM Page 10
Hanger bracket must seat firmly
against outlet box. If the outlet box is
recessed, remove wall board until
bracket contacts box. If bracket
and/or outlet box are not securely
attached, the fan could wobble or
fall.
OUTLET
BOX
TWO SCREWS
SUPPLIED
WITH
OUTLET BOX
Figure 12
2. Carefully lift the fan and seat the hanger
ball/downrod assembly on the hanger
bracket that was just attached to the
outlet box (Figure 13). Be sure the
groove in the ball is lined up with the tab
on the hanger bracket (Figure 12).
Failure to seat tab in groove could
cause damage to electrical wires and
possible shock or fire hazard.
NOTE: CEILING COVER, SUPPL Y WIRES AND FAN
WIRES OMITTED FOR CLARITY.
a qualified
Figure 13
To avoid possible fire or shock, do
not pinch wires between the hanger
ball/downrod assembly and hanger
bracket.
10
WARNING
!
HANGER
BRACKET
TAB
WARNING
!
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY
WARNING
!