Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb; Replacing The Auxiliary Light Bulb - Yamaha XVS650A Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
1. Screw
6
1. Screw
EAU24281 2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
6-29
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit by re-
moving the screws.
ECA10680
1. Screw
2. Remove the socket (together with
the bulb) by pushing it in and turn-
ing it counterclockwise.
EAU33411