Safety Thermostat; Cooling Fan; Shelf Supports - Electrolux EOB 96000 User Information

Built-in electric oven with steam functionality
Table of Contents

Advertisement

Safety Thermostat

To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power
supply. The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat trigger due to
incorrect use of the appliance, it is enough to
remedy the error after the oven has cooled
down; if on the other hand, the thermostat
triggers because of a defective component,
please contact Customer Service.

Cooling fan

The cooling fan is designed to cool the
the oven and the control panel. The fan
switches on automatically after a few
minutes of cooking. Warm air is blown out
through the aperture near the oven door
handle. When the oven is switched off, the
fan may run on after the oven is switched off
to keep the controls cool. This is quite
normal.
The action of the cooling fan will
depend on how long the oven has
been used and at what temperature.
It may not switch in at all at lower
temperature settings nor run on where
the oven has only been used for a
short time.

Shelf supports

The oven has four shelf levels.
The shelf positions are counted from
the bottom of the oven as shown in
the diagram.
Do not place cookware directly
on the oven base.
electrolux 21
4
3
2
1

Advertisement

Table of Contents
loading

Table of Contents