Shelf Supports; The Safety Thermostat - Electrolux Built-in oven Instruction Book

Shelf supports

The oven has four shelf levels. The shelf
positions are counted from the bottom of the
oven as shown in figure 21.
Shelf levels 1, 2 and 4 are fitted with
telescopic shelf supports, to allow en easier
operation when inserting or removing the
shelves.
Pull the right and left hand telescopic shelf
supports completely out, as shown in figure
22.
Place the shelf or the grill pan on the
telescopic shelf supports, then gently push
them all inside the oven (Fig. 22).
Do not attempt to close the oven door if
the telescopic shelf supports are not
completely inside the oven. This could
damage the door enamel and glass.

The Safety Thermostat

This oven is provided with a safety
thermostat. In case of malfunctioning of the
main thermostat, and consequent over-
heating, the safety device will stop the power
supply to the appliance. If this happens, call
your local Service Centre. Under no
circumstances should you attempt to repair
the appliance yourself.
The Cooling Fan for the
Controls
This oven is provided with a cooling fan,
meant to keep the front panel, the knobs
and the oven door handle cool. This fan may
run on after the oven or grill is switched off,
until a normal temperature is reached.
FO 2296
FO 2297
4
3
2
1
Fig. 21
Fig. 22
91