Map Display With Toolbar; The Navi Options Button - Becker TRAFFIC ASSIST Z101 Operating Instructions Manual

Map display with toolbar

The toolbar can be activated by pressing
the following button; pressing it again de-
activates the toolbar:
Additional function buttons are displayed
as well as the map display.

The Navi options button

Using the Navi options you can:
• cancel route guidance,
• enter a waypoint,
• call up the next destination,
• call up the route options,
• display the entire route,
• display directions and
• call up the GPS status.
> Press the
button on the
Navi options
toolbar display.
The Navi options menu appears. You can
quit the menu using the button.
The following settings are available.
NAVIGATIONAL MODE
Option Meaning
You can end active route
Stop guid-
guidance by pressing this
ance
button.
If route guidance is ac-
Insert inter-
tive, you can select a des-
mediate stop
tination as a waypoint.
You have the same op-
tions as with normal des-
tination input.
If several destinations are
Next destina-
entered, the route to the
tion
nearest destination is cal-
culated and the current
destination is skipped
(only with active route
guidance).
Enables route options to
Routing op-
be changed (only with
tions
active route guidance).
See "The Routing op-
tions key" on page 43.
You can display the cur-
Show whole
rently calculated route on
route
the map. You can return
to route guidance by
pressing the
>>>
> D
> GB
> F
> I
> E
> NL
button.
55