Switching Off - Becker TRAFFIC ASSIST Z101 Operating Instructions Manual

When the Traffic Assist is started for the
first time, the language selection will be
displayed automatically.
Using the buttons, it is possi-
ble to scroll through the list in the direc-
tion of the relevant arrow.
> Press the button for the required lan-
guage.
The following question appears shortly
thereafter:
Comply with highway code
> If you agree with this request, press the
key.
OK
Note:
The Traffic Assist may only be used in ac-
cordance with the applicable national
road traffic act!

Switching off

You can switch the unit off at any time. If
necessary, new destinations should first be
saved.
> Press the
button for a few seconds.
If you do not operate any controls Traffic
Assist enters sleep mode after 5 seconds.
> Press the
button to switch
Shut down
Traffic Assist off completely.
GERNARAL OPERATION
Note:
We recommend that you place the Traf-
fic Assist in sleep mode in the event of
short interruptions to operation (up to a
week).
This significantly reduces the switch-on
time and the Traffic Assist finds the satel-
lites required for navigation much faster.
>>>
> D
> GB
> F
> I
> E
> NL
21