Table of Contents
Advertisement
>>>
GENERAL OPERATION
Connection to the mains outlet
> D
!Danger!
> GB
Ensure that you do not have wet hands
> F
and that the power supply unit is dry.
Only connect the power supply unit to
> I
a permissible mains power supply.
> E
Connecting power supply
> P
Connection to the public mains grid is
> NL
achieved using the optionally available
mains power supply unit. Please proceed
> DK
as follows to connect to the mains:
> Open the cover on the left side of the
> S
unit of the Traffic Assist.
> N
> Hold the USB connector at the corru-
gated grip area and push it into the con-
> FIN
necting socket of the Traffic Assist as far
as the stop without employing excessive
> TR
force.
> Insert the plug of the power supply unit
> GR
into the socket.
> PL
Note:
> CZ
Remove the power supply unit when not
using the Traffic Assist for longer periods
> H
of time.
> SK
18
GPS-antenna
Unit antenna
The GPS antenna is integrated into the
housing.
Note:
The integrated GPS antenna is not suita-
ble for use in vehicles with anti-glare win-
dows (metalised thermo-glass or metal
foil, indicated by the window label - SIG-
LA SOL, SIGLA CHROM, SIGLA,
KOOL-OF, SUNGATE, etc.) and vehi-
cles with fine-meshed heating wires in
the windows.
If this is the case, use an external GPS an-
tenna. Please consult your local specialist
dealer.
Connecting up external
antenna
To enable reception under adverse recep-
tion conditions, an external GPS antenna
can be connected (not included). For this
purpose, a closable connecting socket is
located on the rear of the housing. If no
external antenna is connected, this con-
nection must always be closed again.
> Open the closure by pulling gently on
its upper surface.
> Connect the external antenna using the
optionally available adapter.
Advertisement
Table of Contents
