Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bang & Olufsen BEOLAB 8002
Summary of Contents for Bang & Olufsen BEOLAB 8002
- Page 1 BeoLab 8002 Guide...
- Page 2 WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from the AC Mains, disconnect the mains plug from the wall socket.
-
Page 3: Daily Use
Daily use When you have finished setting If the loudspeakers are connected up the loud speakers as described to a nonBang & Olufsen system, on the following pages, connect they switch on when they receive a the entire system to the mains signal from the system (refer to supply. - Page 4 Set up the loudspeaker We recommend that you follow this procedure: – Disconnect your system from the mains supply. – Place the loudspeakers in your setup. – Set the switches to the correct setting. This is explained in ‘Adapt the loudspeakers to your setup’ (page 6).
-
Page 5: Cable Connections
Cable connections The loudspeakers can be used with Bang & Olufsen audio, video and link systems. They may also be used with nonBang & Olufsen systems. For specific information about the sockets on Connection to the your system, refer to the Guide mains supply enclosed with the system. - Page 6 Adapt the loudspeakers to your setup SETUP LINE The loudspeakers may be placed POSITION SETUP almost anywhere in your room. However, the most natural LINE sound is obtained if they are set POSITION up as explained in this section. SETUP switch POSITION switch This switch has three settings: LEFT, When a loud speaker is placed in a...
- Page 7 Position zones: The three settings (free, wall and corner) correspond to the position zones marked in different shades of grey. The POSITION switch has three wall settings: free, wall and Use this setting if the loud speaker corner. is placed less than 15 cm (6") from the wall, and no closer to a corner free than 50 cm (20") –...
- Page 8 >> Adapt the loudspeakers to your setup Cable cover: The rubber tube packed with the loud speakers is a cable cover specially designed for the loudspeakers. Use the enclosed tool to “zip up” the cable cover when you have placed both the mains cord and the Power Link cable inside it.
- Page 9 Waste Electrical and Electronic Electrical and electronic equipment, and waste prevents the potential Equipment (WEEE) – parts and batteries marked with contamination of nature with the Environmental protection this symbol must not be disposed hazardous substances which may of with normal household wastage; be present in electrical and elec...
- Page 10 For the Canadian market only! This class B digital apparatus meets all require ments of the Canadian InterferenceCausing Equipment Regulations. For the US-market only! NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
- Page 12 3510507 1002...