Chapter 9 - Dolphin Quadcharger Device; Overview; Quadcharger Device - Honeywell Dolphin 6100 User Manual

9
Dolphin QuadCharger Device

Overview

The Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery
packs—both standard capacity 2200mAh and extended capacity 3300mAh—in four hours and six hours
respectively. For more details about charging, see
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty. DO NOT attempt to charge damp/wet mobile computers or batteries. All
components must be dry before connecting to an external power source.

QuadCharger Device

Charging Slots
The charger contains four charging slots. Each slot holds one battery. When a battery is placed
in a slot, it immediately begins charging and its Status LED lights.
Status LEDs
A status LED is located at the end of each of the four battery slots. The color of the LED
indicates the charge status of the batteries in the slot.
Green
Red
Power Supply Connector
Use this connector to attach the power supply to the charger. The universal power supply accepts input
voltages between 90–265 volts.
Status LEDs
The battery has completed its charge cycle and is ready for use.
The battery is charging.
Battery Charging on page
Charging Slots
9-2.
Power Supply Connector
9 - 1