Honeywell Dolphin 6100 User Manual page 30

Mobile computer with windows ce 5.0
Hide thumbs Also See for Dolphin 6100:
Table of Contents

Advertisement

To fully charge the Li-ion battery before installing in the terminal, use the
Dolphin QuadCharger Device
the back of either the Dolphin HomeBase or Dolphin eBase.
Charging Time
The standard capacity 2200mAh Li-ion battery pack requires four hours to charge to full capacity, while
the extended capacity 3300mAh pack requires six hours.
Managing Main Battery Power
Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a
continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert
another charged battery pack in the Dolphin. If the main battery pack is low, insert the terminal into a
charging peripheral to power the terminal and begin recharging the battery.
Note: If the main battery is low and the terminal is in suspend mode, pressing the Power button does
Dolphin terminal; you must replace the discharged battery with a fully charged battery.
Checking Battery Power
Power icons appear in the command bar at the bottom of the window. Double tap on the battery icon to
open the Power Properties. The Battery tab opens displaying the charge status of both the main and
backup batteries.
Note: To manually check battery power, also tap Start > Settings > Control Panel > double tap Power.
Storage Guidelines
To maintain optimal battery performance, follow these storage guidelines:
• Avoid storing batteries outside the specified range of -4 to 122° F (-20 to 50°C) or in extremely high
humidity.
• For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.
Guidelines for Battery Pack Use and Disposal
The following are general guidelines for the safe use and disposal of batteries:
• We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may pose a
personal hazard to the user.
• DO NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry
before connecting to an external power source
• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.
3 - 14
(see page 9-1) or insert the battery in the spare battery charging well in
.
not
wake the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents