Chapter 14 - Dolphin Quadcharger Device; Overview - Honeywell Dolphin 9900 User Manual

14
Dolphin QuadCharger Device

Overview

This 4-slot charging station provides intelligent battery management for the Li-ion battery packs used in
Dolphin terminals. The 4th slot features a battery analyzer that completely resets a battery, then displays
its remaining capacity.
Capacity
The charger holds 4 Li-ion batteries.
Charging Time
Charge time is 5 hours.
Charging Process
Each charging slot works independently of the other three. As battery packs charge, the charging circuitry
follows the two-step charging process (CC-CV) that is recommended for Li-ion batteries. The process
monitors changes in temperature, current, and voltage and resets the battery pack.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
Note: The following warnings apply to 99XXXXX-XXXXXXI units (Hazardous Location rated. See
Country on page 1-3.).
Replace only with battery pack type 200002586 manufactured by Honeywell International Incorporated.
Warning: Explosion Hazard. Charge or replace the battery only in an area known to be non-hazardous.
Warning: Explosion Hazard. Do not replace components unless power has been switched off or the area
is known to be non-hazardous.
Warning: Substitution of any components may impair suitability.
Warning: Explosion Hazard. Do not use external connectors in areas known to be hazardous.
Approvals by
14 - 1