AEG B9820-5 User Manual page 36

36 Operating the Oven
Adjusting SETTINGS MENU
1. Using the OPTION
2. Using the arrow buttons
3. Using the OK
4. Using the arrow buttons
5. Press the OK
The value currently set appears in the display.
6. Using the arrow buttons
7. Press the OK
In the display SAVED appears for a few seconds.
Afterwards, you will find yourself back in the Oven Functions menu.
Everyday use of the SETTINGS MENU
Heat+Hold
The Heat+Hold function keeps your prepared dish warm for 30 minutes, after
the baking or roasting process is completed.
This is helpful, for example, if your guests are late.
Pre-condition for Heat+Hold:
• Set temperature is above 80°C
• Fixed duration
Switching on Heat+Hold
1. Select oven function, meat programme or automatic programme.
2. If necessary, set duration or core temperature.
3. Press the SELECTION
4. Confirm with
The Heat+Hold function is now switched on.
5. As soon as the function is completed, a signal sounds and Heat+Hold starts.
The function set runs at 80°C for 30 minutes.
After 30 minutes with Heat+Hold are over, the oven switches itself off.
Irrespective of the function set, Heat+Hold remains active. You can change be-
tween the oven functions.
Heat+Hold can be activated or deactivated in the SETTINGS MENU menu.
button, open the Options menu.
or
button, change to the SETTINGS MENU menu.
or
button.
or
button.
button repeatedly until HEAT+HOLD flashes.
.
select the menu option SETTINGS MENU.
go to the setting that you want to adjust.
select the desired value.