Rear Wheels; Reclining Seat - Baby Jogger PERFORMANCE SINGLE Assembly Instructions Manual

Rear Wheels

• To install, gently slide the wheel's axle into
the hole in the axle end until you hear it
click into place.
4
• To remove, simply push in the spring lock while
pulling out the wheel.
• Your stroller may have a push tab instead
of the spring lock, the above steps will
also work for strollers with the push tab.

Reclining Seat

Spring
Spring
Lock Lock
1
To recline: Pinch the clamp and slide it down the
recline strap to desired recline and push seat down.
2
To return to the upright
position: Hold the D-ring on
the end of the recline strap
in one hand and use the
other to pinch the clamp
and slide it up the strap.
Stroller is packaged with seat support frame and can be
easily removed or inserted into the seat back if additional
support is desired.
NoTe: Be sure to remove the board from
the back of the seat before washing.
5