Front Wheel - Baby Jogger PERFORMANCE SINGLE Assembly Instructions Manual

Footplate
1 2
Insert the footplate tab into Snap down onto
the footplate holder slot. stroller frame.
NoTe: You will need to rest the stroller handle on the floor in order
to get to the bottom of the footplate.
2
1
3
Using a phillips head
screwdriver, attach footplate
to stroller frame with screw
supplied (You will find the
screw in the bag with the
instructions).

Front Wheel

To install front wheel, lay stroller
back so handle is resting on
floor. Squeeze V-Brake caliper
together to release noodle.
2
Insert the front wheel
into the forktips by
aligning the axle flats
with the forktip flats.
NoTe: Ensure that the brake caliper is
properly installed before using stroller.
3
Tighten by turning the wheel lever
while holding the opposite side.
4
Squeeze V-Brake caliper together
to secure brake noodle into
V-Brake mechanism.
3