Tail/Brake Light - Yamaha XJR1300 Owner's Manual

1. Headlight coupler
2. Bulb cover
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
PERIODIC MAINTENANCE AND ADJUSTMENT
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
6-28

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU24181
6