Table of Contents
Advertisement
Speedcook indicator
When the Rapid heat up function has been
switched on, the bars that flash one after the
other indicate that fast heating is working.
Residual heat indicator
When the oven function has been switched
off, the bars that are still lit indicate the re-
maining residual heat in the oven.
Rapid heat up
After an oven function is selected, with the use of the additional function Rapid heat up
the empty oven can be pre-heated in a relatively short time.
Important: Do not put the food to be cooked into the oven, until Rapid heat up is
1
completed and the oven is operating using the desired function.
1. Set the desired oven function (e. g. Conventional
ed temperature.
2. Press the Rapid heat up
The bars flashing one after another show that Rapid heat up is operating.
When the temperature set is reached, the bars of the heat indicator light up. An audible
signal sounds.
The oven now continues heating according to the pre-set oven function and tempera-
ture. You can now place the food in the oven.
The Rapid heat up function can be switched on with the oven functions True fan
3
Fan baking
button.
, Conventional
and Rotitherm
Using the Oven
). If necessary, change the suggest-
.
11
,
Advertisement
Table of Contents
