Disposal - Electrolux B8931-5 User Manual

Electrolux built-in electric oven
Hide thumbs Also See for B8931-5:
Table of Contents

Advertisement

48

Disposal

Problem
F11 appears in the clock
display
An error code not listed
above appears in the time
display
If you are unable to remedy the problem by following the above suggestions,
please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service engi-
1
neers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be chargeable,
3
even during the warranty period.
Advice on cookers with metal fronts:
3
Because of the cold surface at the front of the cooker, opening the oven door during (or
just after) baking or roasting may cause the glass to steam up.
Disposal
Packaging material
2
The packaging materials are environmentally friendly and can be recycled. The plastic
components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pack-
aging materials in the appropriate container at the community waste disposal facilities.
Old appliance
2
The symbol
be treated as household waste. Instead it shall be handed over to the applicable collec-
tion point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropri-
ate waste handling of this product. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
Warning: So that the old appliance can no longer cause any danger, make it unusable
1
before disposing of it.
To do this, disconnect the appliance from the mains supply and remove the mains
cable from the appliance.
The meat probe has short
circuited or the plug of the meat
probe is not firmly in position in
the socket
Fault in the electronics
W
on the product or on its packaging indicates that this product may not
Possible cause
Remedy
Insert the plug of the meat
probe as far as it will go into the
socket on the side wall of the
oven
Switch off the appliance via the
house fuse or the safety switch
in the fuse box and switch it on
again.
If displayed again, please con-
tact the Customer Care Depart-
ment

Advertisement

Table of Contents
loading

Table of Contents