Seat; Helmet Holder - Yamaha TRICKER XG250 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
1
1
2
3
4
5
1. Bolt
6
To install the seat
1. Insert the projection on the front of
7 the seat into the seat holder as
shown.
8
9
EAU13970
2
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
NOTE:
Make sure that the seat is properly se-
cured before riding.
1

Helmet holder

1. Helmet holder
2. Open.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
3-8
1
2
WARNING
EAU14281
EWA10160