Table of Contents
Advertisement
Level
(german degrees)
1
2
3
12 - 22
4
23 - 39
5
40 - 50
To set a different level, proceed as follows:
1. Press the "Intensive 70°" and "Bio 50°" programme pus huttons simultaneously
for about 5 seconds. The pilot light corresponding to the current level flashes.
2. Press within 5 seconds the programme push button corresponding to the required
level. After 5 seconds the the dishwasher will memorise the new level setting and
will return to programme setting mode.
The setting will remain memorised after switching off the dishwasher.
Filling with special salt
Caution! The packaging of dishwasher salt and detergents are often very similar. The
accidental filling of the salt compartment with detergent would ruin the water
softener. Each time you add salt, make sure the carton you have in your hand really
is salt.
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a
dishwasher, especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing
programmes (not the "Rinse and Hold" programme). This will prevent
any grains of salt or salty water, which may have been spilled,
remaining on the bottom of the machine for any period of time,
which may cause corrosion.
Water hardness
°dH
°TH
(french degrees)
0 - 4
0 - 8
5 - 11
9 - 20
21 - 40
41 - 70
71 - 90
SO279
PPM
(parts per million)
0 - 80
81 - 200
201 - 400
401 - 700
701 - 900
Use of
salt
NO
YES
YES
YES
YES
47
Advertisement
Table of Contents
