AEG FAVORIT 85450 VI Instruction Book page 10

To fill:
1. To fill with salt, unscrew the cap of the salt container.
2. Pour 1 litre of water inside the container (this is necessary only before
filling with salt for the first time).
3. Using the funnel provided, pour in the
salt until the container is full.
Do not worry if water overflows from
the unit when filling with salt, this is
quite normal.
4. Replace the cap making sure that
there is no trace of salt on the screw
thread or on the gasket.
5. Screw on the cap tightly.
When this has been done, all that is required is to periodically top up the container
with salt.
You are reminded of this by the salt indicator light on the control panel which will
illuminate when the salt has finished.
Important: The salt refill indicator light on the control panel can remain illuminated
for 2-6 hours after the salt has been replenished, assuring the dishwasher remains
on. If you are using salts that take longer to dissolve then this can take longer. The
function of the dishwasher is not affected.
48
SR14