Filling With Special Salt - AEG FAVORIT 64450 I Operating Instructions Manual

152975 62/0en 10-01-2003
3. To change the level, press the INTENSIV 70° programme push button.
Each time the push button is pressed the level changes.
Examples:
if the current level is 3, by pressing the INTENSIV 70° programme push button
once, level 4 is selected
if the current level is 5, by pressing the INTENSIV 70° programme push button
once, level 1 is selected
The INTENSIV 70° indicator light remains off for about 5 seconds after which it
starts flashing indicating the new level selected.
4. To memorise the new level, switch off the dishwasher by pressing the On/Off
push button.

Filling with special salt

Caution! The packaging of dishwasher salt and detergents are often very similar. The
accidental filling of the salt compartment with detergent would ruin the water
softener. Each time you add salt, make sure the carton you have in your hand really
is salt.
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a dishwasher,
especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing
programmes. This will prevent any grains of salt or salty water, which
may have been spilled, remaining on the bottom of the machine for
any period of time, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the
salt container.
2. Pour 1 litre of water inside the
container (this is necessary only
before filling with salt for the first
time).
3. Using the funnel provided, pour in the
salt until the container is full.
Do not worry if water overflows from
the unit when filling with salt, this is
quite normal.
12
13:04 Pagina 12