Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.
1. Remove the headlight unit by re-
moving the bolts on each side.
1. Bolt
2. Remove the auxiliary light coupler
bracket by removing the screws.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU39384
1. Screw
2. Auxiliary light coupler bracket
3. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
1. Auxiliary light bulb socket
4. Remove the burnt-out bulb by pull-
ing it out.
1. Auxiliary light bulb
5. Insert a new bulb into the socket.
6. Install the socket (together with the
7. Install the auxiliary light coupler
8. Install the headlight unit by install-
6-37
bulb) by pushing it in.
bracket by installing the screws.
ing the bolts.
6