Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha FZ1-N Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Turn signal light lens
6
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
EAU24204
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. License plate light unit
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
[ECA11191]
EAU24313
1. License plate light bulb
2. License plate light bulb socket
3. Remove the burnt-out bulb by pull-
4. Insert a new bulb into the socket.
5. Install the socket (together with the
6. Install the license plate light unit by
6-36
1
2
ing it out.
bulb) by pushing it in.
installing the screws.