Display
The display showns the following
information:
Machine In Pause Mode
You can tell when your washing machine
is in PAUSE mode. The message "
is displayed.
Estimated time of the selected
program
After selecting a program, the estimate
time is displayed in hours and minutes
(for example
2.05
The estimate time is calculated
automatically on the basis of the
maximum recommended load for each
type of fabric.
After the program has started, the time
remaining is updated every minute.
SP
).
End Of Program
When the program is completed the 4
zeros will flash.
Alarm Codes
"
In the event of operating problems,
some alarm codes can be displayed, for
example
and "Troubleshooting fault displays" on
page 27, 28).
Incorrect Option Selection
If an option which is not compatible
with the set wash program is selected,
the message "
about 2 seconds and 3 consecutive
short beeps
19
(see "Troubleshooting"
" is displayed for
ERR