Display
The display shows the following
information:
Estimated time of the selected
programme
After selecting a programme, the
estimate time is displayed in hours and
minutes (for example 2.05).
The estimate time is calculated
automatically on the basis of the
maximum recommended load for each
type of fabric.
After the programme has started, the
time remaining is updated every minute.
Delayed start
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed.
The delay time value decreases by one
unit every hour and then, when 1 hours
remain, the time decreases every minute.
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message
is displayed for about 2
seconds and the integrated red
Start/Pause light start flashing.
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example E20 (see paragraph "Something
not working").
use electrolux 13
EN