Selecting A Greeting - Radio Shack 43-143 Owner's Manual

Beyond the Basics
5. The answering machine announces, "Record greeting."
Begin recording after the announcement.
6. The message counter on the base displays "30", and then
begins to count down.
7. When you finish recording, press the STOP soft key. You will
hear a beep and then playback of your recorded greeting.
From the Handset
1. While the phone is in standby, press the MENU soft key.
2. Select RETRIEVE MSG to access the answering machine.
3. Press the LINE1 or LINE2 soft key.
REMOTE ANSWERINGMACHINE OPERATION appears on the
display. The handset speaker announces the day, time, and
the number of new and old messages.
4. Press 8 at any time during the announcement.
5. The handset speaker announces, "Record greeting."
Begin recording after the announcement.
6. When you finish recording, press
soft key. You will hear a beep, and then playback of your
recorded greeting.
Selecting a Greeting
Once you have recorded a personal greeting, the phone
automatically switches to your personal greeting. You can also
switch back and forth between the pre-recorded greeting and
your own greeting at any time.
From the Base
1. While the phone is in standby, press the MENU soft key.
2. Select the ANSW. SETUP menu, and then the
GREETINGOPTIONS submenu.
3. Press
machine plays the current greeting.
UP841BH_43-143_OM3.indd 72
or to select LINE1 or LINE2. The answering

/5, 8, or the STOP
12/19/2006 6:55:27 PM