Installation; Selecting Alocation - Radio Shack 43-3526 Owner's Manual

ˆ

Installation

SELECTING A
LOCATION
Select a location that is:
• near an accessible AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls
or filing cabinets, wireless
intercoms, alarms, and room
monitors
• away from other cordless phones
The base's location affects the
handset's range. If you have a choice
of several locations, try each to see
which provides the best performance.
Cautions:
You must use a Class 2
!
power source that sup-
plies 9V DC and deliv-
ers at least 300 mA. Its center tip
must be set to positive and its
plug must fit the phone's
jack. The supplied adapter meets
these specifications. Using an
adapter that does not meet these
specifications could damage the
phone or the adapter.
10
• Always connect the AC adapter
to the phone before you connect
it to AC power. When you finish,
disconnect the adapter from AC
power before you disconnect it
from the phone.
Your telephone connects directly to a
modular telephone line jack. If your
telephone wiring does not have a
modular jack, you can update the
wiring yourself using jacks and
adapters (available at your local
RadioShack store), or have the
telephone company update the wiring
for you. You must use compatible
modular jacks that are compliant with
Part 68 of FCC Rules .
Note: The USOC number of the jack
to be installed is RJ11C (or RJ11W
for a wall plate jack).
1. Plug one end of the supplied long
modular cord into the
jack on the back of the base.
2. Insert the supplied AC adapter's
barrel plug into the
on the back of the base.
DC IN 9V
3. Route the adapter's and modular
cords through the slots on the
base bottom.
4. Plug the modular cord's other
end into a modular phone line
jack.
Installation
TEL LINE
jack
DC IN 9V