Installation; A Quick Look At Your Phone; Selecting A Location - Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone Owner's Manual

INSTALLATION

A Quick Look At Your phone

Note: the handset window has plastic film on it to protect it during shipment. Carefully peel off the
film before using your phone for the first time.
Use VOL 8 8 8 8 /9 9 9 9 to adjust the
handset volume (see "Setting
the Handset Volume" on
Page 10).
Use RDL/P to redial the last number
dialed (see "Using Redial" on
Page 10) or store a pause in a number
(see "Entering a Pause" on Page 11).
Use TALK to make a call
(see "Making and Receiving
Calls" on Page 9).
∗ ∗ ∗ ∗
/
Use TONE to use your phone
company's special tone services
when you are on a pulse line (see
"Using Tone Services on a Pulse
Line" on Page 10).

Selecting a Location

You can place the phone's base on a desk top
or table, or mount it on a wall. Select a loca-
tion that is:
• near an accessible AC outlet
• near a telephone line jack
• out of the way of normal activities
Use M1, M2, or M3 for one- touch memory
dialing (see "Memory Dialing" on
Page 11).
• away from electrical machinery, electrical
appliances, metal walls or filing cabinets,
wireless intercoms, alarms, and room
monitors
• away from other cordless phones
The base's location affects the handset's
range. If you have a choice of several loca-
tions, try each to see which provides the best
performance.
6
Use MUTE to talk to someone in the
room without the person on the other
end of the phone line hearing your
conversation (see "Using Mute" on
Page 10).
Use FLASH to select the phone's
flash function (see "Using Flash"
on Page 10).
Use MEM to dial a number stored
in one of the memory locations
(see "Memory Dialing" on
Page 11).
Use CH to select the phone's
channels (see "Selecting the
Channels" on Page 9).