Cleaning And Maintenance - Baumatic BAEC2SS.2 User Manual

Semi-automatic built-in espresso maker
Table of Contents

Advertisement

C
leaning and maintenance
Cleaning operations must only be carried out
when the coffee maker is cold.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.
S ainless steel sections
t
o The stainless steel sections should be cleaned using warm soapy
water.
o No abrasive detergents or cleaners should be used.
o No abrasive sponges or steel wool should be used on any area of
the appliance.
o Dry the
appliance afterwards thoroughly with a soft cloth.
o We would recommend that an appropriate stainless steel cleaner
and polish
is regularly used on the stainless steel surfaces.
Steam pipe
o You sho
uld flush the steam pipe thoroughly with steam after
each use.
o NOTE: When milk cools, it creates impurities which may block
the steam discha
poorly.
o If you have used the steam pipe, you should dismantle the froth
making device and wipe both the sections using a clean sponge
or a damp cloth.
Water reservoir
o If you are n
ot using the appliance for a long period of time, you
should drain the boiler by following the "Dispensing hot water
through the main boiler" section (page 15).
Press the main boiler dispensing button (30) until th
o
is empty.
o If your appliance is connected to your m
should turn the machine off us
from the m
ains, before it starts to refill the reservoir.
rge hole and cause the appliance to function
ing the power ON/OFF switch or
e reservoir
ains water supply, you
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents