Installation - Baumatic BAEC2SS.2 User Manual

o A replacement water softener can be obtained from the
Baumatic Spares Department.
o Whe n a new
the water res
I NSTALLATION
o UK Regulations and Safety
Replacements.
Building Regulations (issued by the Department of the
o
Environment).
o Building Standards (issued by the Scottish Development
Dep artment).
o IEE Wiring Regulations.
Electricity At Work Regulations.
o
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance should be plugged into a 10 A General
Purpose Outlet (GPO), placed in an easily accessible position
adjacent to the appliance. The GPO must still be accessible even
when your coffee machine is located in its housing.
o If you have to change the coffee machine power cord, the
earthing (yellow/green) conductor must always be 10 mm longer
than the line conducto
o Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o If the mains supply cable is damaged, then it must be replaced
with a suitable cable.
w ater softener is fitted, you should follow the filling
e rvoir instructions.
Installation of this appliance must be carried
out by a suitably
accordan ce with the current version of the
following.
Standards or their European Norm
rs.
qualified person, in
23