Tips On Making Tea Using Steam; Cleaning And Maintenance - Baumatic BEC2.1SS Instruction Manual

o Wipe over the filter holder and cup filter with a damp cloth to
keep it in pristine condition.
o Remove the screw from the centre of the filter holder ring nut;
clean the water filter thoroughly so that there are no traces of
tea left on it. Then refit the filter to the filter holder ring nut,
making sure that the screw is securely tightened.

Tips on making tea using steam

o Connect the steam pipe (18) to the steam pipe
o Immerse the spout of the steam pipe into a cup of cold water.
o Follow the "Dispensing steam" process on page 14.
o Leave the steam pipe in position when steam starts to come out.
You should leave the pipe in position until the water is boiling.
o Then place a tea bag into the cup of boiling water and leave it in
the water until it reaches your desired strength.
Turn off the machine using the ON/OFF button (12).
o
o Make sure that the steam spout is cleaned thoroughly after use.

Cleaning and maintenance

Cleaning operations must only be carried out
when the coffee maker is cool.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.
Stainless steel sections
o The stainless steel sections should be cleaned using warm soapy
water. Dry the appliance afterwards thoroughly with a soft cloth.
o No abrasive detergents or cleaners should be used.
o No abrasive sponges or steel wool should be used on any area of
the appliance.
holder nut (6); making sure that it is securely
attached to the nut.
23