Cleaning And Maintenance - Baumatic PECM1SS Instruction Manual

Semi-automatic built in espresso maker
Hide thumbs Also See for PECM1SS:
Table of Contents

Advertisement

Cleaning and maintenance

Cleaning operations must only be carried out
when the coffee maker is cold.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.
Stainless steel sections
o The stainless steel sections should be cleaned using warm soapy
water.
o No abrasive detergents or cleaners should be used.
o No abrasive sponges or steel wool should be used on any area of
the appliance.
o Dry the appliance afterwards thoroughly with a soft cloth.
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces.
Steam pipe
o You should flush the steam pipe thoroughly with steam after
each use.
o NOTE: When milk cools, it creates impurities which may block
the steam discharge hole and cause the appliance to function
poorly.
o If you have used the steam pipe, you should dismantle the froth
making device and wipe both the sections using a clean sponge
or a damp cloth.
Water reservoir
o If you are not using the appliance for a long period of time, you
should drain the boiler by following the "Dispensing hot water
through the main boiler" section (page 15).
o Press the main boiler dispensing button (30) until the reservoir
is empty.
o If your appliance is connected to your mains water supply, you
should turn the machine off using the power ON/OFF switch or
from the mains, before it starts to refill the reservoir.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents