Making Drinks; Connecting The Filter Holder To The Main Boiler; Making A Drink Using Coffee Pods - Baumatic BAEC2SS.2 User Manual

M aking drinks
Connecting the filter ho
o Lift the filter holder (1) towards the filter holder ring nut (19);
making sure that it is in the position shown in the drawing
above.
o Continue lifting the holder until it locates inside of the ring nut.
o Turn the handle o
is fully secured.
o When you have finished using the holder, turn the han
clockwise and remove it from the filter holder ring nut (19).
IMPORTANT: If the filter gets attached to the boiler, you
should carefully remove it. This is a result of a v
b eing created during the espresso making process.

Making a drink using coffee pods

Coffee pods are an easy, practical and hygienic way to make coffee.
The packaging used for coffee pods does not
s pill out and can be easily removed after use.
o IMPORTANT: If you are using Italian coffee
pods, then the filter for 1 Italian coffee pod (4)
must be used. If you are using French coffee
pods, then the
must be used.
o For best results ensu
to their use by date.
o Follow the instructions on filling the water reservoir (pages 11 –
14) and "Dispensing hot water through the main boiler" (page
15).
lder to the main boiler
f the holder anti-clockwise, making sure that it
filter for 1 French coffee pod (6)
re that the coffee pods are used prior
acuum
allow excess coffee to
dle
16